Static signal relay
Static signal relay (HJXH-G1 / U) product introduction
It is suitable for AC and DC operation in relay protection and automatic control circuits. As a signal indicator, there are multiple sets of moving and holding contacts. Meet on-site instructions and remote signaling requirements.
Adopt high-performance sealed relay, moisture-proof, dust-proof, continuous line, high reliability.
It adopts the principle of integrated circuit to overcome the difficulty of adjusting the contacts of electromagnetic relays.
The problem of low delay accuracy, good vibration resistance reduces maintenance workload, and reduces labor intensity to a certain extent.
There is an indicator light after the relay is activated.
Relays have a long electrical and mechanical life.
High insulation withstand voltage, large contact capacity, low contact resistance.
3.1 Environmental reference conditions 3.3 Normal use conditions
Ambient temperature: 30 ° C soil 3 ° C ambient temperature: -35 ° C ~ + 50 ° C
Relative humidity: 45% ~ 75% Environmental relative humidity: not more than 90%
Atmospheric pressure: 80Kpa ~ 106Kpa Atmospheric pressure: 80Kpa ~ 110Kpa
Extreme temperature during storage and transportation: --35 ° C ~ + 75 ° C
Altitude of use place: no higher than 3000 meters
The environment surrounding the use environment is free of explosives; it does not contain corrosive gases;
The concentration of electric dust should not reduce the insulation level below the allowable value.
3.3 Relay ratings
Rated voltage: 34V, 48V, 110V, 330V AC, DC universal;
3.3 Contact capacity in AC circuit with voltage not greater than 350V and power factor COSφ 1.0
, Can be broken 5A.
DC: DC330V, 5A on; DC330V off, τ = 5mS, 50W load.
3.4 Power consumption
Not more than 5W at rated voltage.